FAQ
1. How do I select the right NSQ window-type current transformer?
Select an NSQ current transformer according to your primary current, required secondary output, accuracy class, rated burden, and conductor dimensions. Check both the window opening and overall dimensions to ensure compatibility with your switchgear or distribution panel. Provide these specifications when requesting a model recommendation.
2. Can NSQ current transformers accommodate both busbars and cables?
NSQ window-type current transformers allow the primary conductor to pass through the opening. Suitability depends on the busbar width and thickness or the cable’s outside diameter, including insulation. For multiple busbars, provide their combined dimensions and arrangement so the required clearance can be checked against the model’s dimensional drawing.
3. Should I choose a 1A or 5A secondary output?
Choose a secondary output that matches the rated CT input of your connected meter or monitoring device. NSQ current transformers are listed with 5A output, with 1A available on request. For longer secondary wiring, a 1A circuit can reduce cable burden compared with a 5A circuit using the same conductor size. Confirm the complete circuit burden before ordering.
4. What accuracy classes and rated burdens are available for NSQ current transformers?
The NSQ model table lists Class 0.5 and Class 1.0 options. Available rated burdens depend on the model and current ratio, so the required accuracy and VA rating must be confirmed together. Include the burden of the connected instrument and secondary wiring when selecting the CT to ensure the circuit meets the specified operating conditions.
5. What information is needed for an NSQ current transformer quotation?
Please provide the primary-to-secondary current ratio, accuracy class, rated burden in VA, operating frequency, busbar or cable dimensions, and order quantity. Also specify any installation space limits and required technical documents. If you are replacing an existing CT, a clear nameplate photograph and dimensional drawing will help identify a suitable replacement.