FAQ
1. What current ratios and secondary outputs are available for the RBH50/30 current transformer?
The listed RBH50/30 specifications include 5A secondary outputs with primary ratings from 50A to 500A. A 400/1A, 5VA, Class 1.0 specification is also shown. When requesting a quotation, specify your required current ratio and the secondary input rating of your meter.
2. What accuracy classes and rated burdens are available for the RBH50/30 CT?
The published selection table lists Class 3.0 for 50/5A–75/5A, Class 1.0 for 100/5A and 120/5A, and Class 0.5 for 125/5A–500/5A. Confirm the rated burden for your selected specification before ordering, as the connected meter and secondary wiring must suit the CT’s rating.
3. Can the RBH50/30 current transformer be installed on busbars and cables?
Yes. The RBH50/30 is a window-type current transformer designed to fit around a busbar or cable passing through its opening. Provide your busbar width and thickness, or cable outside diameter, so HEYI can verify compatibility against the dimensional drawing before purchase.
4. Does installing the RBH50/30 CT require disconnecting the primary conductor?
Yes. The RBH50/30 has a closed-core design, so the primary conductor must be disconnected and passed through the opening during installation. This makes it suitable for new installations or projects with planned shutdowns. Installation should be performed with the circuit safely isolated.
5. How do I select the correct RBH50/30 CT for an energy meter or multifunction power meter?
Match the CT’s primary rating to the circuit’s operating current and its 1A or 5A secondary output to the meter input. Then check the required accuracy class, total burden of the meter and wiring, and available installation space. Send HEYI your meter specifications and conductor dimensions for selection assistance.